Arjohuntleigh FLOWTRON UNIVERSAL, Service Manual

Page: 21 / 116

Flowtron Universal Service Manual Maintenance
Issue 2 Chap 3
Sep 2009 SER0009 Page 3
3 Maintenance Checks
If any parts are found to be damaged they must be replaced in accordance with Chapter 5,
Pump Repair.
3.1 Visually inspect the following for damage, wear and potential faults:
3.2 Remove the rear case (Refer to Chapter 5, Page 13, Section 10) and visually inspect the
following for damage, wear, security and potential faults:
• Outer casing: Check for damage and security.
• Run button : Check function.
• Handle and hook assembly: Check for damage and security.
• Output hose set assemblies: Check for damage and security of pump connection.
• LCD d membrane label: Check for damage and security to case.
• Mains/power cord: Check for damage and security of plug
• Rubber feet (8 Off): Check for security.
• Labels: Check all labels are present and legible
• Rechargeable battery on the control PCB.
• Compressor assembly.
• Compressor anti-vibration pads.
• Motor and manifold assembly.
• Control PCB and LCD display assembly.
• Power supply PCB assembly, including fuses.
• Wiring.
• Internal Tubing.
• Screws, nuts and bolts.