Arjohuntleigh FLOWTRON UNIVERSAL, Service Manual

Page: 83 / 116

Flowtron Universal Service Manual Pump Repair
Issue 2 Chap 5
Sep 2009 SER0009 Page 45
38 Removing the Compressor Assembly from the Mounting Bracket
38.1 Remove the compressor assembly and mounting bracket from the pump (Refer to
Page 43, Section 36).
38.2 Lay the compressor assembly (Fig 59, Item 10) and mounting bracket (Fig 59, Item 20) down
with the mounting bracket on top (Refer to Figure 60).
38.3 Remove the two screws (Fig 59, Item 50) and compressor bump stops (Fig 59, Item 40) from
the compressor assembly (Fig 59, Item 10) and mounting bracket (Fig 59, Item 20).
38.4 The compressor assembly is still attached to the mounting bracket via the four anti-vibration
(AV) mounts (Fig 59, Item 60). Separate the compressor assembly from the mounting bracket,
as follows (Refer to Figure 60):
38.4.1 Start at one corner of the compressor assembly.
38.4.2 Hold the compressor assembly, and push the mounting bracket in towards the centre of
the compressor assembly.
38.4.3 At the same time, carefully push the AV mount in the opposite direction and out of the
slot in the mounting bracket.
38.4.4 Repeat for the other three corners of the compressor assembly.
39 Installing the Compressor Assembly onto the Mounting Bracket
39.1 Lay the compressor assembly (Fig 59, Item 10) down with the AV mounts (Fig 59, Item 60) on
top, and the two cables to the power supply PCB assembly at the front (Refer to Figure 60).
39.2 Lay the mounting bracket (Fig 59, Item 20) on top of the compressor assembly, with the angled
part of the mounting bracket on top and at the back of the compressor assembly (Refer to
Figure 60).
39.3 At one end of the compressor assembly, carefully push the grooved part of the two AV mounts
into the slots in the mounting bracket (Refer to Figure 60).
Figure 60 - Removing the AV Mounts from the Mounting Bracket
Push the Compressor Mounting Bracket inwards
Push the AV Mount
out of the slot in the
Compressor
Assembly
Compressor
Mounting
AV Mount
Mounting Bracket
Cables to Power
Supply PCB Assembly
Bracket