Argo All 6X6, Service Manual

Page: 188 / 297

Transmission Argo Service Manual
TR-10
Disassembling The Input Shaft
1. Using an arbor press, remove the smaller ball bearing from the end of the input shaft.
2. Remove the retaining ring at the reverse gear.
3. Remove the reverse and low gear from the input shaft at the arbor press.
4. Slip the dog clutch from the input shaft and remove the retaining ring & Thrust
Washer found above the High Gear.
5. Slip the high gear from the input shaft, and remove the thrust washer and Retaining
Ring found below it.
6. Remove the last ball bearing from the input shaft at the arbor press.
MAIN INDEX
WA INDEX TR INDEX