Argo All 6X6, Service Manual

Page: 185 / 297

Transmission Argo Service Manual
TR-7
3. Remove the oil seal from the input shaft.
4. Remove the retaining ring from the input shaft.
5. Remove the retaining rings from both
output shafts. There may or may not be
shims below the retaining rings.
Separating the Transmission
1. There are 3 threaded tab locations provided on the 34-100 transmission housing (in-
put shaft side). These locations are used to assist in separating the two halves of the
transmission during disassembly. As 3 bolts are threaded into the housing, they come
into contact with the opposite housing, pushing and separating the 2 halves. Thread
each of these bolts a little at a time and in an uniform alternating pattern. DO NOT
overtighten to avoid the risk of breaking the housing tab. Stop occasionally to tap the
output shaft with a soft faced hammer. Repeat this until the cover has separated.
2. Pull the housing halve, up and off from the input shaft side.
MAIN INDEX
WA INDEX TR INDEX