Argo All 6X6, Service Manual

Page: 158 / 297

Wheels, Axles & Chains Argo Service Manual
WA-13
6. Perform the servicing procedure, Installing The Drive Chain .
7. Pull up on the cam assembly to allow it to take up as much chain slack as possible.
8. Replace the floor pans.
Replacing A Slider Block (Scissor Style Chain Tensioner)
1. Remove the floor pans.
2. Release the spring torsion on the scissor style chain tensioner system.
3. With pliers, pry the slider block off each of the change tensioner arms.
4. Install the new slider blocks by snapping each one on to the chain tensioner arms us-
ing the pliers.
5. Reconnect the tension spring between each tensioner arm.
Disassembling The Chain Tensioner System (Semi-Self Adjust)
1. Perform the servicing procedure, Removing The Drive Chain.
2. With the chain removed, unfasten the clamp holding the chain tensioner system and
let it unwind to its top most position. Unfasten the spring at the cam's tab. To pull the
tensioner assembly free of the frame guides, push the long shaft side of the cam as-
sembly down to the bottom of the guide. At the same time raise the opposite side up
and out of the guide.
MAIN INDEX
WA INDEX