Argo All 6X6, Service Manual

Page: 295 / 297

Transmission Argo Service Manual
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421 TR-117
11. Disconnect the cable from the e-brake assembly.
12. The transmission is secured to the vehicle frame with two (2) HHCS 1/2-13X3.00
GR5 ZN Bolts and Lockwashers to the right side of the transmission (front and rear),
and two (2) HHCS 1/2-13X1.25 GR5 ZN Bolts and Lockwashers to the left side of
the transmission.
NOTE
Note the difference in bolt length between the right hand side and the left hand side. The
right hand side bolts are 3.0" in length, the left side mounting bolts are 1.25" in length.
13 Remove the two rear bolts and lockwashers.
14. Remove the two forward mounting bolts and lockwashers.
15. Lift the transmission carefully from the frame. This will require the aid of another
person.
Installing the Transmission (34-200) ADMIRAL
1. With the aid of a second pair of hands, position the transmission back into the frame
aligning the mounting holes to insert the mounting Bolts and Lockwashers. See note
above.
2. Install all four (4) Mounting Bolts to secure the transmission to the vehicle frame.
Remember to install the 3.0" length bolts to the RIGHT side of the transmission, and
the 1.25" Bolts to the LEFT hand side.
Torque Front and Rear Mounting Bolts to
80 FT.LBS. (101.7Nm ).
3. Perform the servicing procedure, Installing The Service Brake Disc (Aurora Mod-
els).
NOTE
Apply anti-seize compound to the unthreaded portion of the Coupler Bolts, and install
them to connect the Idler Shaft to the transmission Output Shafts.
TR INDEX
MAIN INDEX