Argo All 6X6, Service Manual

Page: 217 / 297

Transmission Argo Service Manual
TR-39
28. Press a 101-03 & 101-16 Bearing into the Left Transmission Housing.
29. Apply Black 598 LOCTITE RTV Silicon Gasket Maker around the perimeter of the
Transmission Housing
30. Press the Left Hand Housing to the Right Hand Housing at the arbor press. Tap with a
soft face mallet while pressing at the output shaft area. This will ensure that the hous-
ing is pressed on squarely and evenly to the lower half.
31. Secure the halves of the transmission together using (10) 112-143, (1) 112-144 fasten-
ers & (11) 108-05 lockwashers installed from the left side of the Housing. Three (3)
112-143, (1) 112-144 fasteners and (4) 108-05 lockwashers are installed from the right
side of the Housing.
Torque to 20FT-LBS
Two of these fasteners are shorter and are assembled into the transmission casting at blind
holes. One is assembled at the drain plug area from the left side of the housing and the
other at the Shifter Lever area from the right side of the housing.
NOTE
MAIN INDEX
WA INDEX TR INDEX