Argo All 6X6, Service Manual

Page: 281 / 297

TR-1 03
Argo Service Manual Transmission
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Note: If input shaft needs to be pressed into housing you must use a special fixture
that pushes on the 34-215 Forward Pinion or else transmission may not spin freely.
Install reverse idler shaft assembly with the flats on the 3/8" holes facing towards the
inside of the transmission.
Note:
Step on 34-220 Idler Pinion must face upwards.
Insert a 34-231 Shift Shaft through the 105-33 Flanged Bushing and through the
34-221 Shift Shaft
, and make sure it spins freely and does not bind.
Note: If shaft is tight to turn the 34-221 Shaft must be rotated.
Pull the 34-221 Shift Shaft back out half way and slide on a 127-186 Spring followed by
(2) 12731594 Washers , (1) 114-21 Spacer and a 34-232 Shift Fork
.
TR INDEX
MAIN INDEX