Argo All 6X6, Service Manual

Page: 209 / 297

Transmission Argo Service Manual
TR-31
Assembling Transmission Components to Housing
1. Apply some LOCTITE pipe sealant to the threads of the 103-02 drain plug and install
into the housing.
2. Start the 34-114 Reverse Shift Shaft into the housing boss.
3. Place a 108-78 Thrust washer above the 34-108 Reverse Idler, and a 108-81 Retain-
ing Thrust Washer (machined side down), below the Reverse Idler. Push the 34-114
Reverse Shift Shaft completely through the Reverse Gear and washers and into the
opposite side of the housing. Install the Reverse gear with the chamfered teeth facing
up.
4. Install the 34-32 Spring into the machined hole of the 34-102 Right Hand Housing at
the Reverse Shift Shaft location.
5. Install the 109-05 Steel Ball to the top of the Spring.
6. Push down on the Steel Ball using the access hole from the top of the Transmission
Housing. While the ball is compressed, press the shaft over top of the ball.
MAIN INDEX
WA INDEX TR INDEX