Argo All 6X6, Service Manual

Page: 66 / 297

ES-14
Electrical System Argo Service Manual
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Removing Starter Motor - Kawasaki 800
IMPORTANT
This procedure will require the removal of the engine from the vehicle for best access
to the starter motor mounting fasteners. It will also ensure proper alignment during
installation and proper torque values for the starter motor bolts.
1. Remove the engine from the vehicle. Refer to Removing The Engine (Kawasaki
800)
in the engine section of this service guide.
2. Place the engine to a clean work bench.
3. Locate the starter at the rear of the engine.
4. Remove the two (2) bolts securing the starter to the engine block.
5. Slide the starter out from the blower housing side of the engine.
6. Install starter motor and torque bolts to 15 FT. LBS. (20Nm)
7. Reinstall the engine. Refer to Installing The Engine Briggs (600, 650 or 700) in the
engine section of this service guide.
ES INDEX MAIN INDEX