Wheels, Axles & Chains
Argo Service Manual
WA-15
5. Insert the extended length of the torsion spring, assembled to the cam, into the hole of
the welded tab on the frame. At the same time, place the same side of the cam's shaft
into the tensioner systems guide.
See following page.
6. Push the previously inserted spring side of the cam to the bottom of the guide and
raise the opposite side to place over top the extended length of the second torsion
spring on the opposite side.
10
.
7. Allow the assembly to sit in the up most position.
8. Assemble the short stem of the torsion spring on the cam's shaft, into the tab on the cam.
9. Turn the cam assembly in the direction which winds up the torsion spring at the same
time pushing the assembly down as close as possible to the cam follower block across the
bottom of the frame channels. Clamp it in this position until the chain is reinstalled.
See
following page.
MAIN INDEX
WA INDEX
Summary of Contents for All 6X6
