Argo All 6X6, Service Manual

Page: 113 / 297

Brake System Argo Service Manual
BR-25
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
2. Apply anti-seize compound to the out
put shaft spline.
3. Align the splines of the brake disc with those of the output shaft and slide the brake
disc on to seat up against the shoulder of the shaft.
IMPORTANT
The brake disc should slide on by hand. Do NOT force or hammer to install.
4.
Using a 9/16" socket, tighten the HHCS 3/8-24x1.25 Gr5 Zn securing the Steering Brake
Disc with lockwasher and flat washer.
5. Secure with the bolt and flat washer. Torque to 30 FT.LBS (40.7Nm)
6. Slide the idler shaft sprocket back into position and seat the retaining ring back to the
original groove.
7. Perform the servicing procedure, Installing the Idler Chain (Frontier Models -
Auto Idler Chain Adjust).
8. Reinstall the Steering Brake Caliper and torque to 283 in.lbs. (31.9Nm).
9. Reinstall the Parking Brake Caliper
10. Loosely snug the Parking Brake Caliper hardware. Squeeze the hand brake a few
times to centre the pads and then hold the brake on while tightening the hardware to
a final torque of 209 in.lbs (23.6 Nm).
BR INDEX MAIN INDEX