69
CD973A
NOTE: For steps 7-13, refer to illustration H1-
029A.
NOTE: To aid in installing, it is recommended that
the assemblies are kept together and IN ORDER.
H1-029A
7. Using a hydraulic press, remove the clutch housing
assembly from the clutch cover. Account for the left
fixed drive spacer and an O-ring inside the fixed
drive spacer.
CF085
CC596
NOTE: Account for and inspect the clutch housing
seal.
CF088A
8. Remove the two cap screws securing the gear posi-
tion switch; then remove the switch.
9. Remove the nut (left-hand threads) securing the
clutch shoe assembly (C).
PR410A
10. Remove the cap screw securing the oil pump drive
gear (B). Account for a cap screw, washer, pin, and
spacer.
CAUTION
Care must be taken when removing the cover so the
cover gasket is not damaged.
KEY
A. Oil Pump Driven Gear
B. Oil Pump Drive Gear
C. Clutch Shoe Assembly
D. Final Drive Carrier Bearing
Housing
Summary of Contents for HDX CREW 2017
Page 1: ...2017 S SERVICE ERVICE MANUAL ANUAL www arcticcat com...
Page 151: ...150 NOTES...