34
HDX344A
INSTALLING
1. Secure the latch to the frame with new cap screws
and lock nuts.
2. Install the front row plastic side panels (center); then
secure with the cap screws.
3. Install the front splash panels and front outer fenders;
then secure with the cap screws.
Dashboard
REMOVING
1. Remove the steering wheel, shift lever knob, and
front access panel.
PR890A
2. Remove the hood seal; then disassemble and remove
all four front fenders (outer fenders first).
HDX267A
HDX268A
3. Remove the cap screws around the perimeter of the
dashboard.
ROV-887
4. From under the dashboard, disconnect the accessory
plugs, override switch, drive select switch, and igni-
tion switch. Note the orientation of the connectors
for installing purposes.
5. Remove the instrument gauge from the dashboard
and disconnect it; then remove the cap screws secur-
ing the steel access plate on the driver’s side behind
the dashboard. Disconnect the headlight switch con-
nector.
HDX269
6. Remove the upper cap screw and lock nut from the
tilt steering sub-assembly and support lift. Discard
the locknut.
CENTER
Summary of Contents for HDX CREW 2017
Page 1: ...2017 S SERVICE ERVICE MANUAL ANUAL www arcticcat com...
Page 151: ...150 NOTES...
