66
CD944
NOTE: The sharp side of the snap ring should be
facing outward.
NOTE: Once the gears are secured, remove the oil
passage plug from the crankcase.
3. Install the two starter gear shafts; then install the two
starter gears.
CD139
H2-045
4. In order on the crankshaft, install a washer, ring gear,
key, and the magneto rotor. Secure with the nut
(coated with red Loctite #271). Tighten to 105 ft-lb.
CD948A
CD940B
5. Install the thrust washer and shift cam plate onto the
shift cam shaft; then coat the cap screw threads with
red Loctite #271 and tighten to 8 ft-lb.
PR433A
CD934
6. Install the shift cam stopper, spring, and two washers
(thick washer closest to the nut); then coat the
threads on the mounting stud with red Loctite #271
and install the nut. Tighten to 8 ft-lb.
Summary of Contents for HDX CREW 2017
Page 1: ...2017 S SERVICE ERVICE MANUAL ANUAL www arcticcat com...
Page 151: ...150 NOTES...
