43
8. Loosen the clamp securing the throttle body to the
intake manifold boot; then remove the throttle body
and set aside.
9. From the left side, disconnect the ECT sensor con-
nector, speed sensor connector, and spark plug cap.
HDX135A
HDX359
10. Remove the cap screws securing the shift cable
bracket to the engine case. Remove the cap screw
from the shift arm and disconnect the gear position
switch connector. Slide the gear position switch off
the engine.
HDX251D
11. Disconnect the starter cable from the starter; then
remove the cap screw securing the engine/harness
ground wires to the engine case.
HDX149A
12. Remove the CVT inlet and exhaust ducts from the V-
belt housing.
HDX146A
HDX147A
13. Remove the forward heat shield from the exhaust
pipe; then remove the cap screws securing the
exhaust pipe to the cylinder head.
HDX152A
Summary of Contents for HDX CREW 2017
Page 1: ...2017 S SERVICE ERVICE MANUAL ANUAL www arcticcat com...
Page 151: ...150 NOTES...
