30
4. Remove the cap screws securing the second row kick
panels to both center side panels; then remove the
remaining cap screws securing both center side pan-
els to the frame.
HDX347A
HDX348A
5. Remove the remaining cap screws and self-tapping
screws securing the floorboard to the frame.
6. While pulling forward on the upper rear section of
the floorboard, lift the rear part of the floor away
from the seat locating studs.
HDX349
NOTE: To aid in removing, insert a small wood
block to hold in position.
PR164
7. From the opposite side of the vehicle, repeat step 6;
then lift the rear of the floor up and lift the floor out
of the vehicle.
HDX350
Cleaning and Inspecting
1. Clean the floor with soap and water.
2. Inspect the floor for cracks or holes.
Installing
1. Place the front of the floor into position in the vehi-
cle first; then lower the rear and push past the seat
locating studs.
2. Secure the floor with cap screws and self-tapping
screws.
3. Install the center footrest support bracket, kick pan-
els, front side panels, and center footrest.
4. Using the self-tapping screws, secure both center
side panels to the frame and second row steel kick
panels. Install the front seat.
REAR
Removing
1. On the right side of the vehicle, remove the gas cap;
then remove both rear side panels.
Summary of Contents for HDX CREW 2017
Page 1: ...2017 S SERVICE ERVICE MANUAL ANUAL www arcticcat com...
Page 151: ...150 NOTES...
