3-31
3
Inspecting
1. Inspect the pulley faces for wear, galling, or
grooving.
KM394A
2. Inspect the O-rings on the movable face for
nicks, tears, or swelling.
KM380A
3. Inspect two grease seals in the movable face for
nicks, cuts, or damage.
KM380B
KM382A
4. Inspect the pins and bushings for wear, flat
spots, looseness, or cracking.
KM379
5. Measure the driven face spring free length. If
the free length is less than 131 mm (5.24 in.),
the spring must be replaced.
KM376
6. Measure the driven fixed face hub using a cali-
pers. The minimum service limit is 39.93 mm
(1.57 in.).
Back to TOC
Back to Section TOC
Next
Back
Summary of Contents for DVX 250 2007
Page 1: ......
