9-4
CD476
KM801C
5. Fill the master cylinder reservoir with DOT 4
brake fluid and bleed the system (see Section 2).
Throttle Control
REMOVING
1. Remove the boot from the throttle cable
adjuster; then loosen the jam nut and turn the
adjuster completely in to loosen the cable.
2. Remove the three machine screws securing the
cover to the throttle control; then remove the
cover and disengage the throttle cable from the
throttle arm.
3. Turn the cable adjuster out of the throttle control
housing; then remove the two machine screws
securing the throttle control to the handlebar and
remove the throttle control.
INSTALLING
1. Making sure the throttle housing upper flat
aligns with the alignment mark on the handle-
bar, place the throttle control into position on the
handlebar and secure with the two machine
screws; then tighten the machine screws
securely.
KM122B
2. Thread the throttle cable into the throttle hous-
ing and turn the adjuster completely in; then
connect the throttle cable to the throttle arm.
3. Install the throttle housing cover; then adjust the
throttle cable (see Section 2).
Back to TOC
Back to Section TOC
Back
Summary of Contents for DVX 250 2007
Page 1: ......
