8-5
8
SP107
2. Remove the CDI, start-in-gear relay, and fuse
block and lay aside without disconnecting the
wires; then remove the shift knob.
3. Remove the six cap screws securing the body to
the top of the frame; then remove the cap screws
from the bottom of the battery box.
KM782A
KM790A
4. Remove four flange nuts and cap screws secur-
ing the rear fender support; then remove the
push nuts from the mounting studs at the front of
the rear fenders.
KM785A
KM784A
5. Remove the hardware securing the front fenders
to the fender supports; then disconnect the head-
light.
KM352A
6. Turn the handlebar to the left; then raise the
body turning it to the right and lift clear of the
handlebar.
REMOVING (Utility Model)
1. Remove the seat; then remove the battery box
cover.
Back to TOC
Back to Section TOC
Next
Back
Summary of Contents for DVX 250 2007
Page 1: ......
