3-6
KM314
16. Remove the output drive sprocket cover; then
remove the output drive sprocket.
KM344A
17. Disconnect the shift linkage from the transmis-
sion shift arm.
KM313
18. Remove the front engine mounting
through-bolt; then remove the left and right
engine mounting brackets from the frame.
19. Attach a suitable lifting sling and engine lift to
the front engine mounting boss.
KM332
20. Raise the engine lift to take the slack out of the
sling; then remove the upper rear and lower rear
engine through-bolts.
KM333A
KM325A
21. Raise the front of the engine sufficiently to
allow the engine assembly to be moved forward
enough to clear the rear mounting brackets
(approximately 6 in.).
22. Lower the front of the engine slowly, swing the
rear of the engine to the left, and slide the engine
out of the left-side of the frame.
Back to TOC
Back to Section TOC
Next
Back
Summary of Contents for DVX 250 2007
Page 1: ......
