Portable Test Equipment
User’s Guide
PTE-UGFW56a-EN
www.appliedp.com
22
Meaning of keys in mode of generated signals shapes:
F1
..... return to previous screen
F2
..... overview of concrete signal (in
screen “Signal Shapes” opens “Signal Shape Edit”
screen)
..... adding another harmonic content in
“Edit Signal Shape” screen
F3
..... addition of another new user signal to the end of list in
“Signal Shapes” screen. By
default, a new signal is named USERx, where X is a sequence number and this
signal contains only first fundamental harmonic.
..... deletion of last harmonic in sequence in
“Edit Signal Shape” screen
F4
..... saving the current changes in
screens “Signal Shape Edit” and “Fixed Shape
Settings
”
..... deletion of last user signal in sequence in
“Signal Shapes” screen
The above mentioned deletions of harmonics and signals are realized without confirmation.
4.2 DB Measurements and Tests
You can get into Database Measurements and Tests
’ screen by
F4
from Basic generator screen or
from Generator settings, item no. 4. If Measurement is in progress (
F1
key from “DB Measurement”
screen was pressed) only the second option is possible.
Measurement is a list of tests. Test is defined load point. User can define various load points and then
assigned them into measurements. Once set, the whole measurement runs automatically. Such tests
can be set only from PTE interface (so far). Later, it will be possible to use PC software to generate
such tests and measurements using user friendly interface.
In this screen all available measurements are present.
First field
Name
serves as filter. User types partial
name of any available measurement and after
confirmation only valid ones remain visible. Valid
means that filtered text string occurs in the name of
particular measurements.
Table with columns
NAME
(measurement name) and
#
(number
of
tests
contained)
displays
all
measurements with the regard of above mentioned
filter.
Screen of DB Measurements
with name
and number of tests per measurement
* P137
