Portable Test Equipment
User’s Guide
PTE-UGFW56a-EN
www.appliedp.com
54
RANGE
(Input A / Input B) ....... Settings of ranges for both measurement inputs (this part of settings
is stored in SD card, but only for particular accessory. If other
accessory is used, default values will be loaded. Accessory is
identified by its serial number)
Auto
............................. Automatic range selection:
ON
(enabled) or
OFF
(disabled). Device
chooses best suitable range depending on measured values if
automatic range selection is enabled.
Value
............................ Manually selected range (valid if parameter Auto is OFF)
Meas. Settings screen 3/6
* P46
Meas. Settings screen 4/6
* P88
Start-up mode
........................ Defines initial measurement settings (Connection type, System,
Energy, Constant, Unit) activated right after device power up:
Meas.
determines last settings used before switch-off,
Test
defines parameters of last used meter from database.
REACTIVE POWER MEAS
..... Setting of reactive power measurement
Method
........................ Measurement method:
True
= definition calculation gained by phase shift or Active Power
(U * I * sin Fi)
Cross
= calculation from artificial connection (used in some meter
types). Condition is: the system must be balanced.
UNCONNECTED INPUT
......... Settings for unconnected voltage input checking
Check
.......................... Whether to check (
ON
) or not (
OFF
) the presence of voltage on
measured object
ENERGY MEASUREMENT
.... Settings of energy measurement
Unit
.............................. Unit of energy:
Ws
or
kWh
Method
........................ Way of summing energy:
4Quadrant
,
Algo 1
(Net Result),
Algo 2
(Positive Aggregate),
Algo 3
(Both Sum),
Algo 4
(Anti-fraud)
Sense
.......................... Energy register displayed on the screen Energy Values (see chapter
Import
for summed imported energy or
Export
for summed exported energy
Time base
............................... integration time of measurement, valid range is 1s
– 100s
VECTOR DIAGRAM
................ Settings of vector diagram displaying
Zero axis
...................... Position of reference zero axis: Vertical or Horizontal
Reference
.................... Reference unit: Voltage or Current
HARMONICS
........................... Harmonics related settings
