Portable Test Equipment
User’s Guide
www.appliedp.com
PTE-UGFW56a-EN
89
VOLT:AC:RANG:AUTO {<auto_range>}
Setting the auto voltage range in connected voltage accessory (Voltage Transducer). Parameter is: 0
= OFF,
1 = ON.
CURR:AC:RANG?
Request for the current range in connected current accessory.
Answer can be 0, 1 … (up to
supported number of ranges).
CURR:AC:RANG {<range>}
Setting the current range in connected current accessory
. Parameter can be 0, 1 … (up to supported
number of ranges).
CURR:AC:RANG:AUTO?
Request for the status of auto current range in connected current accessory. Answer is: 0 = OFF, 1 =
ON.
CURR:AC:RANG:AUTO {<auto_range>}
Setting the auto current range in connected current accessory. Parameter is: 0 = OFF, 1 = ON.
CHNLA:AC:RANG?
Request for the measurement
range in accessory connected to input A. Answer can be 0, 1 … (up to
supported number of ranges).
CHNLA:AC:RANG {<range>}
Setting the measurement range in accessory connected to input A. Parameter can be 0, 1 … (up to
supported number of ranges).
CHNLA:AC:RANG:AUTO?
Request for the status of auto range in accessory connected to input A. Answer is: 0 = OFF, 1 = ON.
CHNLA:AC:RANG:AUTO {<auto_range>}
Setting the auto range in accessory connected to input A. Parameter is: 0 = OFF, 1 = ON.
CHNLB:AC:RANG?
Request for the range in accessory connected to input B. Answer can be 0, 1 … (up to supported
number of ranges).
CHNLB:AC:RANG {<range>}
Setting the measurement range in accessory connected to input B. Parameter can be 0, 1 … (up to
supported number of ranges).
CHNLB:AC:RANG:AUTO?
Request for the status of auto range in accessory connected to input B. Answer is: 0 = OFF, 1 = ON.
CHNLB:AC:RANG:AUTO {<auto_range>}
Setting the auto range in accessory connected to input B. Parameter is: 0 = OFF, 1 = ON.
MEAS:VOLT:AC?
Request for voltage values.
MEAS:VOLT:AC:PHAS?
Request for phases between voltages.
