CHAPTER 7
Replacing the power supply
65
Replacement of PSU
To replace the PSU on the PSU frame follow the steps below:
•
Remove the PSU frame with PSU completely out of the bottom
panel and lay it flat on the table.
•
loosen the three M4x6mm screws fixing the PSU on the PSU
frame located on the side of the PSU using a Phillips PH-2 screw
driver.
•
loosen the M3x5mm screws fixing the PSU on the PSU frame lo-
cated on the top of the PSU using a Phillips PH-1 screw driver.
•
The PSU can now be removed from the frame and replaced by a
new PSU.
Figure 22. Removing PSU from the PSU frame. The four screws fixing the
PSU are encircled in red.
Summary of Contents for DECADE Elite
