56
175.0020 - DECADE Elite service manual - rev 03
5. Opening the cell cabinet
To access the electronics compartment from the front side of the detector
(to install an additional internal cell cable) follow the steps described be-
low:
•
Remove all cell cables, tubing, cells, columns etc. from the oven
compartment.
•
Remove the 4 rubber liners of the inlet/outlet (tubing) openings in
the detector oven compartment (position of the liners marked by a
red arrow).
•
Remove the 4 M3 x 8mm screws to loosen the cell cabinet using a
Phillips PH-1 screw driver (screws encircled in red).
Figure 14 Left: removal of the rubber liners in the inlet/outlet openings in
the detector oven compartment. Right: Removing the M3 screws securing
the detector cell cabinet.
Summary of Contents for DECADE Elite
