50
175.0020 - DECADE Elite service manual - rev 03
Figure 7 Detector with rear panel pulled backwards and frame with elec-
tronic boards accessible.
The rear panel is constrained by the length of the connected cables. The
PCB frame can rest on the casing of the power supply compartment with-
out any problem (as depicted in the figure above).
2. Disconnecting internal wiring
Remove all cables connected to the control board below the blank metal
EMC casing (with white label) as depicted in the photograph on the next
page. Open the white cable clamp mounted on the bottom of the PCB
frame and remove the cables from the clamp.
Do not disconnect the primary power and grounding connections on
the mains inlet and rear panel (crossed out in red in the photograph) .
Summary of Contents for DECADE Elite
