Anritsu MD8470A, Operation Manual, Page: 70 / 114

3.2.7 Using Ethernet connectors
An external PC, etc., can be connected to the MD8470A via the Ethernet0
or Ethernet1 connector on the rear panel using an Ethernet cable.
10BASE-T/100BASE-TX is supported.
The IP address is set as follows at factory shipment settings.
Table 3.2.7-1 IP address settings at factory shipment
Connector IP Address Subnet mask
Ethernet0 192.168.1.2 255.255.255.0
Ethernet1
Obtains an IP address automatically.
CAUTION
Do not connect to networks such as the Internet via the
Ethernet connector (Ethernet0, Ethernet1). Anritsu is not
responsible for problems generated by connecting to a
network.
3.2.8 Using USB devices
The USB devices available for the MD8470A are as follows. Note that
only the USB connectors on the rear panel side conform to USB 2.0.
Table 3.2.8-1 Connectable USB devices
Connector Connectable USB Specification
Front Panel
×
2 Conforms to USB 1.1
Rear Panel
×
2 Conforms to USB 2.0/USB 1.1
[Connectable USB devices examples]
•
DVD/CD drive
•
USB memory
Halt access to USB devices before removing these devices.
CAUTION
Do not connect USB devices while power is On and Win-
dows is starting up. The device may freeze as a result.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com