Anritsu MD8470A, Operation Manual, Page: 34 / 114

2.1.2 Front panel
1
2
3
4
Fig. 2.1.2-1 Front panel (1)
1. Power switch
This is the switch to switch power ON or to standby (Stby).
RF connector
2. RF Main Main I/O connector
This is an N-type main I/O connector. It is used as an input connec-
tor when Input is lit, as an output connector when Output is lit and as
an I/O connector when both Input and Output are lit.
3. RF Aux1 Aux1 I/O connector
This is an N-type auxiliary I/O connector. It is used as an input
connector when Input is lit, as an output connector when Output is lit
and as an I/O connector when both Input and Output are lit.
4. RF Aux2 Aux2 I/O connector
This is an N-type auxiliary I/O connector. It is used as an input
connector when Input is lit, as an output connector when Output is lit
and as an I/O connector when both Input and Output are lit.
CAUTION
Do not input power beyond the permissible maximum
power written on the label or in the specifications to the RF
input and output connectors. Do not input a signal to the
RF connector set to output. This may damage the internal
circuits and cause a fire or accident to occur.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com