Anritsu MD8470A, Operation Manual, Page: 60 / 114

2.3.13 Ethernet connectors
The Ethernet0 and Ethernet1 connectors located on the rear panel of the
MD8470A are RJ-45 connectors for connecting to external PCs, etc.
10BASE-T/100BASE-TX is supported. Use a cable with shielding in or-
der to observe radiation interference specifications.
The rear panel of the MD8470A has Call Proc Ethernet connectors and
ISDN connectors, which are identical RJ-45 connectors. Check the con-
nector labels when connecting and be careful so as not to connect to the
wrong connection point.
Table 2.3.13-1 Ethernet0, Ethernet1 connectors and signal assignments
Pin Signal Name
1 TD+
2 TD
−
3 RD+
4 NC
5 NC
6 RD
−
7 NC
8 NC
CAUTION
Do not connect Ethernet0 and Ethernet1 connectors to
networks such as the Internet. Anritsu is not responsible
for any damage caused by connection to a network.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com