R o h d e & Sc h w a r z
1 2 9
3. After making the appropriate settings, click OK and OK again and go to online mode to start
the scanning.
4. A green light on the scanner Device Status window should start blinking. This means that the
device is working properly and scanning using the default settings. In TOP-N Mode this may
take a few seconds.
5. Click the Start Recording button
to start recording the results in an output file.
TOP-N Pilot Scanning - CDMA/EVDO
♦
Note that the EVDO measurements can only be performed in a proper way when a CDMA
2000 channel is measured as well. In this way, the time relationship between the different
PN offsets is resolved.
1. After the Rohde & Schwarz TSMQ scanner is connected and activated in Nemo Outdoor,
open the
Measurement Properties
dialog by selecting
Measurement | <device> | General
Properties
.
2. In the
Measurement Properties
dialog, go to the
Pilot Scanning, CDMA
page.
Pilot Ec/I0 threshold
defines the threshold level for the pilot Ec/I0. If the values are below the
threshold, the pilots are not scanned.
Summary of Contents for NEMO FSR1
Page 1: ...Version 6 20 SCANNER GUIDE...
