PC T EL
9 7
TOP-N Pilot Scanning - UMTS
Unknown Pilot scanning can be used for scanning unknown pilots or the strongest pilots. The
Unknown Pilot Scan will from now on be referred to as TOP-N Pilot Mode.
1. After the scanner is connected and activated in Nemo Outdoor, open the
Measurement
Properties
dialog by selecting
Measurement | <device> | General Properties
.
2. Go to the Pilot scanning page.
CPICH Ec/No threshold
defines the minimum level for the CPICH Ec/No. If the values are
below the threshold, the pilots are not reported.
Channel style
refers to the style of the channel.
Data processing method
defines how the scanned data is processed by the scanner. In
aggregate method, the sum of all peak pilot Ec/Io values above the PN threshold is
calculated. If there are no peaks above the PN threshold, value -30 dB is returned for WCDMA.
Pilot measurement mode
defines the measurement mode for pilot scanning.
•
In
High speed
mode scanning speed is higher but sensitivity is lower. In high speed mode,
weak pilots may be undetected.
•
In
High dynamic
mode scanning speed is lower but sensitivity is higher.
Summary of Contents for NEMO FSR1
Page 1: ...Version 6 20 SCANNER GUIDE...
