A n r it s u
3 3
ANRITSU
CONNECTING ANRITSU SCANNERS
♦
These instructions apply to all Anritsu scanners, except Anritsu MS2721B DVB-H
Analyzer.
1. Connect the antenna cable to scanner RF Input. If you are measuring with a dual-mode
scanner that supports both GSM and WCDMA, use the RF1 input (see picture). RF2 input
only supports WCDMA scanning.
2. Connect the battery cable to the battery and to a power source.
3. The Battery led of the scanner should turn green.
Summary of Contents for NEMO FSR1
Page 1: ...Version 6 20 SCANNER GUIDE...
