PC T EL
1 0 9
3. Clear the TOP-N mode option and click the
Select Channels
button. The
Select
Scrambling Codes
dialog is opened.
4. Select channels in the
Selected channel numbers
table by clicking the
Select
button.
♦
With a PCTEL scanner a maximum of 8 channels can be selected in the pilot mode.
5. For each selected channel, select scrambling codes. Select a channel and click the Select
button below the Selected scrambling codes table.
6. Click OK to return to the Measurement Properties dialog.
7. Data
processing method
defines how the scanner will process samples before reporting.
8.
PN threshold
defines the limit above which Ec/N0 peaks must go if Aggregated data
processing method is used.
♦
In Pilot Scanning Mode the RSSI is always measured for each channel.
♦
In Pilot Scanning Mode the P-CPICH Ec/N0 and RSCP are always measured for each
scrambling code.
9. After making the appropriate settings, click OK and OK again and go to online mode to start
the scanning.
10. A green light on the scanner Device Status window should start blinking. This means that the
device is working properly and scanning using the default settings. In TOP-N Mode this may
take a few seconds.
11. Click the Start Recording button
to start recording the results in an output file.
Summary of Contents for NEMO FSR1
Page 1: ...Version 6 20 SCANNER GUIDE...
