N e m o F S R 1
2 4
Top-N mode
option enables/disables TOP-N scrambling code scanning.
Number of pilots
field
defines how many pilots are reported by the scanner in TOP-N mode
.
The
Top-N Configuration
button will open the
Select Channels
dialog where you can select
channels for pilot scanning.
♦
Note that the Nemo FSR1 scanner supports a max of 90 cell IDs.
3. After making the appropriate settings, click OK and OK again and go to online mode to start
the scanning.
4. A green light on the scanner Device Status window should start blinking. This means that the
device is working properly and scanning using the default settings. In TOP-N Mode this may
take a few seconds.
5. Click the
Start Recording
button
to start recording the results in an output file.
TOP-N Pilot Scanning – LTE
1. Open the Measurement Properties dialog by selecting
Measurement
|
<device>
|
General
Properties
.
2. Go to the
Pilot scanning
,
LTE
page to define LTE-specific pilot scanning settings.
Summary of Contents for NEMO FSR1
Page 1: ...Version 6 20 SCANNER GUIDE...
