A n r it s u
5 3
DVB-H Scanning
DVB-H scanning can be performed with the Anritsu MS2721B DVB-H Analyzer scanner.
1. Open the
Measurement Properties
dialog by selecting
Measurement
|
<device>
|
General
Properties
.
11. In the
Measurement Properties, Pilot scanning, DVB-H
page, select a frequency to be
measured. Anritsu MS2721B DVB-H Analyzer scans frequencies between (DVB-H) 474 -
850 MHz.
12. After making the appropriate settings, click OK and OK again and go to online mode to start
the scanning.
13. A green light on the scanner Device Status window should start blinking. This means that the
device is working properly and scanning using the default settings.
14. Click the Start Recording button
to start recording the results in an output file.
Summary of Contents for NEMO FSR1
Page 1: ...Version 6 20 SCANNER GUIDE...
