PC T EL
8 5
PCTEL EX Mini series scanners:
•
WCDMA 2100
PCTEL EX UMTS 2100
•
WCDMA 850/1900
PCTEL EX UMTS 850/1900
•
WCDMA 900/2100
PCTEL EX UMTS 900/2100
•
WCDMA AWS
PCTEL EX UMTS AWS
PCTEL MX
PCTEL MX
PCTEL PCT GSM 900/1800
PCTEL PCT GSM 900/1800
PCTEL PCT UMTS 2100
PCTEL PCT UMTS 2100
5. In the
Scanner Properties
dialog, set the COM Port to the port the scanner is connected to.
With MX scanners, select the
PCTEL USB
item.
6. Set the baud rate to the one used by the scanner and click
OK
. The dialog will be closed and
the scanner should now be connected to the system.
7. If the dialog did not close, the start-up did not succeed. Check the cable connections and the
settings and try again.
8. From the
View
menu activate
Device Status
. A check mark will appear next to the
command when it is activated.
9. A green light on the PCTEL
scanner in the
Device Status
window should be blinking. This
means that the device is working properly and scanning using the default settings. See
chapter Starting Measurement (page 125) for instructions on making your own scanner
configuration.
Summary of Contents for NEMO FSR1
Page 1: ...Version 6 20 SCANNER GUIDE...
