N e m o F S R 1
3 0
Band Scan
With the Nemo FSR1 scanner you can perform band scanning. All specified channels are
scanned for the selected band and technology and the strongest measured identifiers (CDMA
PN, EVDO PN, WCDMA SC, LTE Cell ID) for every valid channel of that technology type are
reported. Signal strength and signal quality are reported for each identified channel. This feature
is useful in areas where broadcasted technologies and bands are unknown.
1. To start a band scan, right click the Nemo FSR1 item in the Devices view and select
Band
Scan
.
2. Available technologies and bands supported by the scanner are shown under
Scan
settings
. Please note that only licensed technologies (systems) are shown.
3. Select the technologies and bands that you want to be scanned and define the threshold
levels for the parameters available.
4. Finally press the
Start Scan
button. With the default threshold values it takes approximately
two minutes and 30 seconds to scan GSM 900, 1800 and WCDMA 2100 bands. The
scanning rate can be increased by adjusting the threshold values.
Summary of Contents for NEMO FSR1
Page 1: ...Version 6 20 SCANNER GUIDE...
