R o h d e & Sc h w a r z
1 2 7
7. Click
OK
to return to the
Measurement Properties
dialog.
8. After making the appropriate settings, click OK and OK again and go to online mode to start
the scanning.
9. A green light on the scanner Device Status window should start blinking. This means that
the device is working properly and scanning using the default settings. In TOP-N Mode this
may take a few seconds.
10. Click the Start Recording button
to start recording the results in an output file.
TOP-N Pilot Scanning - UMTS
1. Open the Measurement Properties dialog by selecting
Measurement
|
<device>
|
General
Properties
.
2. Go to the
Pilot scanning
,
UMTS
page to define UMTS-specific Pilot scanning settings.
CPICH Ec/No threshold
defines the minimum level for the CPICH Ec/No. If the values are
below the threshold, the pilots are not reported.
Channel style
refers to the style of the channel.
Summary of Contents for NEMO FSR1
Page 1: ...Version 6 20 SCANNER GUIDE...
