Table 7-51:
Store/Restore Parameters to Flash Command - Header (Continued)
Field Name
Type
Notes
Reserved3
U4
0
Table 7-52:
Store/Restore Parameters to Flash Command - Payload
Field Name
Type
Notes
Store/Restore
U1
1 – Store
2 – Restore
Table 7-53:
Store/Restore Parameters to Flash Response - Header
Field Name
Type
Notes
Module ID
U1
1
Reserved1
U1
0
Command ID
U2
0x15
Version
U4
1
Reserved2
U4
0
Payload Size
U4
0
Result Status
U4
0 – Successful
1 – Invalid Version
Get Production Parameters
The Get Production Parameters command returns the FLASH information related to:
•
Board ID
•
Lens type
•
Lens center offset
Lens center offset is computed by subtracting the lens center coordinates from the image center. The X axis of the
image is parallel to the image rows and its direction is from left to right. The Y axis of the image is parallel to the
image columns and its direction is from top to bottom.
C++ API:
void
SnapSensor::SensorConnection::ADIS1700xApplication::
GetProductionParameters (ADIS1700xProductionParameters
*productionParameters)
Main Application Messages
7–24
ADIS1700x Vision-Sensing Camera Module User Guide
