damage can occur on devices subjected to high energy ESD. Therefore, proper ESD precautions
should be taken to avoid performance degradation or loss of functionality.
Board Installation
Complete the following steps to set up the hardware.
1. Connect the ADIS1700x board from the adapter shown in the
ADIS1700x Evaluation Board
to a USB port of
a PC using the supplied USB cable.
2. Optionally, connect the ICE-1000 or ICE-2000 to the JTAG connection and the other end to a USB port of a
PC. This step is required for debugging using CCES.
Figure 3-1:
ADIS1700x Evaluation Board
Board Installation
3–2
ADIS1700x Vision-Sensing Camera Module User Guide
