•
Connects to a device running the SNAP Framework
•
Copies the current application firmware and data into the restore point section of the flash
RecoverRestorePoint
RecoverRestorePoint
is a console application that has the following features:
•
Connects to a device running the SNAP Framework
•
Copies the current application firmware and data from the restore point section of the flash
ContinuousVideoRecorder
ContinuousVideoRecorder
is a console application that has the following features:
•
Connects to a device running the SNAP Framework
•
Creates an image sequence (video) file with the user-supplied name
•
Continuously captures image data from the ADVS200x sensor on the device
•
Saves each captured frame into the image sequence file
RandomFrameVideoRecorder
RandomFrameVideoRecorder
is a console application that has the following features:
•
Connects to a device running the SNAP Framework
•
Creates an image sequence (video) file with the user-supplied name
•
Whenever the user hits a key, it captures an image from the ADVS200x sensor on the device and saves it to the
image sequence file
CaptureLoop
CaptureLoop
is a console application that has the following features:
•
Connects to a device running the SNAP Framework
•
Continuously downloads the image data from the ADVS200x sensor in a loop that runs in a separate thread
NOTE:
This console application is only available with the development installer.
MultiSensorCaptureLoop
MultiSensorCaptureLoop
is a console application that has the following features:
•
Connects to up to three devices in parallel running the SNAP Framework
•
Continuously downloads the image data from each of the ADVS200x sensors in loops that run in separate
threads
SnapSensorLibrary
ADIS1700x Vision-Sensing Camera Module User Guide
5–3
