manualshive.com logo in svg

Analog Devices ADIS1700 Series, User Manual

Share
Download
Analog Devices ADIS1700 Series User Manual Download Page 17

4   Installation

This chapter describes how to the install the SNAP Sensor library and create a Win32 project.

Install the SNAP Sensor Library

Install the following components on the target PC:

•

Visual C+ Redistributable for Visual Studio 2015

. (Download from 

https://www.microsoft.com

.)

•

Microsoft .NET framework 4.5.2.

 (Download from 

https://www.microsoft.com

.)

Complete the following steps to install the 

SnapSensorLibrary

.

1. Run the installer 

SnapSensorLibrary_Demo.msi

.

NOTE:

If a previous version of the application already exists on the PC, it must be uninstalled first.
See the 

Uninstall SNAP Sensor Library 

section.

2. Follow the instructions of the installer.

The applications are installed under 

Analog Devices

 >

SnapSensorLibrary

>

Install the ADI WinUSB Driver

The ADI WinUSB driver must be installed so that the application can communicate with a device running the the
SNAP Framework over the USB.

Complete the following steps to install the ADI WinUSB driver.

1. Connect the device to the PC through the USB port.

Windows starts searching for the driver.

2. Stop the automatic search and select the option for manually locating the driver.

3. Point to the driver folder (

C:\Analog Devices\SnapSensorLibrary\Drivers\ADI WinUSB).

Installation

ADIS1700x Vision-Sensing Camera Module User Guide

4–1

Summary of Contents for ADIS1700 Series


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands