3. Select the
IMU
tab.
4. Modify the parameters, as required.
a. Choose the
Accelerometer
tab to edit the accelerometer offsets, ranges and filter values.
5. Click
Upload
to upload the IMU parameters to the ADIS1700x device.
6. Click
Yes
when requested to save the data on the ADIS1700x device flash.
7. Select Smart Camera mode
Updating Firmware
There are two tasks associated with updating the firmware stored in the device flash storage:
•
•
When the device powers up, the bootloader firmware is loaded into memory and starts running. The bootloader
firmware then looks for the application firmware in the flash storage. It loads it into memory and starts running it.
When the bootloader firmware is running, the application mode is Bootloader.
When the application firmware is running, the application mode is Configuration, Sensor or Smart Camera.
To update the bootloader or application firmware, switch to the Bootloader mode (the bootloader firmware is run-
ning).
ADIS1700x Demo Application
5–20
ADIS1700x Vision-Sensing Camera Module User Guide
