Product Information
3
NXP-TPI/4 NetLinx Touch Panel Interface
Specifications (Cont.)
Memory:
• 64 MB SDRAM (upgradeable to 256 MB)
• 64 MB Compact Flash (upgradeable to 1 GB - factory programmed)
• See the
Other AMX Equipment:
section on page 6 for component upgrade
information.
Supported Audio
Sample Rates:
• 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz,
11025Hz, and 8000Hz.
Certifications:
• FCC (Class A) and CE
Touch Drivers:
Displays the touch driver used by the TPI/4 to interact with the touch device.
The following list shows the series of available touch input drivers that are
selectable by using the TOUCH button on the front panel of the TPI/4:
-
AMXDL15A
: Selected when using an AMX DL15A touch panel.
-
Cirque
: Selected when using a Cirque
®
touch panel or other
compatible touch device driver.
-
DynaPro
: Selected when using either a DynaPro
®
touch panel or
other compatible DynaPro touch device driver.
-
EloTouch
: Selected when using either an ELO
®
touch panel or other
compatible ELO touch device driver (
default
).
-
Elo19Touch
: Selected when using a 19-inch ELO
®
touch panel or other
compatible ELO touch device driver.
-
Eyegonomic
: Selected when using either an Eyegonomic
®
touch panel
or other compatible Eyegonomic touch device driver.
-
EZScreen
: Selected when using either an EZScreen
®
touch panel or
other compatible EZScreen touch device driver.
-
EZScreenV6
: Selected when using either an EZScreenV6
®
touch panel
or other compatible EZScreen touch device driver.
-
ISTTouch
: Selected when using either an ISTTouch
®
touch panel or
other compatible IST touch device driver.
-
MicroTouch
: Selected when using either a MicroTouch
®
touch panel
or other compatible MicroTouch device driver.
-
MicroTouchMT3000
: Selected when using either a MicroTouchMT3000
®
model touch panel or other compatible MicroTouch device driver.
-
MicroTouchPen
: Selected when using either a MicroTouchPen
®
touch
device or other serial SMT3(R)/Tou) driver.
-
NullTouch
: Selected when no touch driver is being used.
Use this option when working with a CRT monitor
.
-
SanyoTouch
: Selected when using either a SanyoTouch
®
touch panel
or other compatible SanyoTouch device driver.
-
SerialMouse
: Selected when using a Microsoft
®
compatible serial mouse.
-
SmartTech
: Selected when using either a SmartTech
®
touch panel or
other compatible SmartTech touch device driver.
-
SyncMaster173v
: Selected when using either a SyncMaster173v
®
touch panel or other compatible SyncMaster device driver.
-
Wacom
: Selected when using either a Wacom
®
touch panel or other
compatible Wacom touch device driver.
-
Wacom2
: Selected when using a Wacom
®
touch panel which requires the
use of additionally compatible Wacom touch device drivers.
• For updated touch driver information, visit
www.amx.com
• Refer to
List of Touch Monitors tested with the TPI4
section on page 139 for a
more detailed list of Touch Monitors that have been tested with the TPI4
• Refer to the
Step 2: Setting the Touch Drivers
section on page 29 for more
information.
Summary of Contents for NetLinx NXP-TPI/4
Page 38: ...TPI 4 and Panel Interface Setup 32 NXP TPI 4 NetLinx Touch Panel Interface...
Page 60: ...Upgrading TPI 4 Firmware 54 NXP TPI 4 NetLinx Touch Panel Interface...
Page 138: ...Troubleshooting 132 NXP TPI 4 NetLinx Touch Panel Interface...
Page 147: ...Appendix 141 NXP TPI 4 NetLinx Touch Panel Interface...