Upgrading TPI/4 Firmware
53
NXP-TPI/4 NetLinx Touch Panel Interface
10.
Click the
Reboot Device
checkbox. This causes the TPI/4 to reboot after the firmware update
process is complete.
The reboot of the unit can take up 30 seconds after the firmware process has
finished.
11.
Click
Send
to begin the transfer. The file transfer progress is indicated on the bottom-right of the
dialog.
12.
Click
Close
on the Send to NetLinx dialog window (
after the TPI/4 reboots
) to return to the main
program.
13.
Right-click the associated System number and select
Refresh System
. This causes a refresh of all
project systems, establishes a new connection to the Master, and populates the System list with
devices on your particular system.
14.
Press the front panel SETUP button (on the TPI/4) to navigate to the Setup page.
15.
Confirm the current firmware version on the cards by pressing the
Video Adjustment
button and
then the corresponding
Slot #
button of the target TP4 card.
FIG. 38
Send to NetLinx Device dialog (showing NXA-BASE/B firmware update via IP)
Selected Battery Base Firmware file
Description field for selected KIT file
Device
value
and System
number
must match the values
listed in the Workspace window
Firmware download
status
The firmware for the input card can not be downloaded directly. Download of the KIT
file to the cards is done through the TPI/4. The procedures for updating firmware to
the cards is nearly identical to those for updating TPI/4 firmware, except that the KIT
file selected must be that of the particular card(s).
Summary of Contents for NetLinx NXP-TPI/4
Page 38: ...TPI 4 and Panel Interface Setup 32 NXP TPI 4 NetLinx Touch Panel Interface...
Page 60: ...Upgrading TPI 4 Firmware 54 NXP TPI 4 NetLinx Touch Panel Interface...
Page 138: ...Troubleshooting 132 NXP TPI 4 NetLinx Touch Panel Interface...
Page 147: ...Appendix 141 NXP TPI 4 NetLinx Touch Panel Interface...