Configuring Communication
43
NXP-TPI/4 NetLinx Touch Panel Interface
7.
The
Network Interface Select
field is read-only for the TPI/4 and uses
Wired
as the default method
of communication to the web.
Wired
is used when a direct Ethernet connection is being used for communication to the web.
This is the default setting if either no wireless interface card is detected or if both an Ethernet
and wireless card connection is detected by the panel.
The
Wireless
option is unavailable within TPI/4.
8.
Press the
Web Control Name
field to open the Web Name keyboard.
9.
From the Web Name keyboard, enter a unique alpha-numeric string to identify the TPI/4.
This
information is used by the NetLinx Security Web Server to display on-screen links to the unit.
The on-screen links use the IP Address of the panel and not the name for communication
(FIG. 29).
10.
Press
Done
after you are finished assigning the alpha-numeric string for the Web Control name.
11.
Press the
Web Control Password
field to open the Web Password keyboard.
12.
From the Web Password keyboard, enter a unique alpha-numeric string to be assigned as the G4
Authentication session password associated with VNC web access of this TPI/4.
13.
Press
Done
after you are finished assigning the alpha-numeric string for the Web Control password.
14.
Press the
Web Control Port
field to open the Web Port Number keypad.
15.
Within the keypad, enter a unique numeric value to be assigned to the port the VNC Web Server is
running on. The default value is
5900
.
FIG. 28
G4 Web Control page
FIG. 29
Sample relationship between G4 Web Control and Mange WebControl Connections window
Summary of Contents for NetLinx NXP-TPI/4
Page 38: ...TPI 4 and Panel Interface Setup 32 NXP TPI 4 NetLinx Touch Panel Interface...
Page 60: ...Upgrading TPI 4 Firmware 54 NXP TPI 4 NetLinx Touch Panel Interface...
Page 138: ...Troubleshooting 132 NXP TPI 4 NetLinx Touch Panel Interface...
Page 147: ...Appendix 141 NXP TPI 4 NetLinx Touch Panel Interface...