![background image](http://html1.mh-extra.com/html/amx/enova-dvx-3150hd/enova-dvx-3150hd_operation-reference-manual_2939055019.webp)
Overview
6
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide
Mounting the DVX into an Equipment Rack
The DVX occupies three rack units in a standard equipment rack. The following steps apply to mounting the
DVX.
1.
Discharge any static electricity from your body by touching a grounded metal object.
2.
Position and install the mounting brackets, as shown in FIG. 2, using the supplied mounting screws.
FIG. 2 displays how the brackets should be attached to the DVX:
3.
Install the DVX in the mounting rack by using the mounting screws to affix the unit to the rack.
4.
Connect any applicable wires to the DVX. Refer to the
Wiring and Device Connections
section on page 9
for wiring diagrams and pinout descriptions.
Connect the unit only to a properly-rated supply circuit.
The left and right mounting brackets are not identical. Please install in the orientation
shown.
FIG. 2
Rack mounting the DVX
Brackets attach at the side
toward the front of the unit
DO NOT stand other units directly on top of the DVX when it is rack mounted, as this
will place excessive strain on the mounting brackets.