Wiring and Device Connections
25
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide
Twisted Pair Cable Pinouts
AMX supports both the T568A and T568B pinout specifications for termination of the twisted pair cable used
between the DVX and the DXLink receiver.
Important Cable Recommendations
Cable runs with a minimum specification of ANSI/TIE/EIA 568A-5 and ratings of 250MHz or better may be
used with DXLink equipment. However, cable run topology and environmental influences can affect the
overall successful distance capabilities of these runs. For successful deployments up to 100 meters without
consideration to outside variables, AMX recommends the use of shielded category cable (STP) or Cat6A (or
better) versions of unshielded or shielded twisted pair (UTP/STP) for DXLink runs. For more details and
helpful cabling information, please contact your AMX representative for a copy of the white paper titled
"Cabling for Success with DXLink".
FIG. 34
Twisted pair cable pinouts for T568A (recommended) and T568B specifications
