![background image](http://html1.mh-extra.com/html/amx/enova-dvx-3150hd/enova-dvx-3150hd_operation-reference-manual_2939055065.webp)
Audio/Video Configuration
52
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide
Status Menu
Press the STATUS button to access the Status menu and display system information on the LCD display. Use
the UP and DOWN navigational buttons to scroll through the menu options. These options are view-only,
except where noted.
Status Menu
Vid Out
Displays which video input is associated with each output.
Aud Out
Displays which audio input is associated with each output.
Mic Out
Displays the active status of each microphone output.
System Number:
Displays the system number of the All-In-One Presentation Switcher.
Serial Number:
Displays the serial number of the All-In-One Presentation Switcher.
MAC Address:
Displays the MAC address of the All-In-One Presentation Switcher.
IP Address Type:
Displays whether the IP address is static or DHCP.
IP Address:
Displays the IP address of the network.
IP Subnet Mask:
Displays the subnet mask of the network.
IP Gateway:
Displays the gateway address of the network.
IP DNS Addr:
Displays the IP or DNS address of the device.
Master FW Version:
Displays the version number of the firmware the Master is using.
Device FW Version:
Displays the version number of the firmware the device is using.
DSP FW Version:
Displays the version number of the DSP firmware the All-In-One Presentation
Switcher is using.
FPGA FW Version:
Displays the version number of the video FPGA the All-In-One Presentation Switcher
is using.
Diagnostic Codes:
Displays informational codes useful for troubleshooting and diagnostics.
LCD Brightness:
Use the left and right navigational buttons to adjust the backlight intensity of the LCD
display. You can set the LCD Intensity between 0 and 100. The default setting is 50.
LED Brightness:
Use the left and right navigational buttons to adjust the backlight intensity of the front
panel buttons. You can set the LED Intensity between 0 and 100. The default setting
is 50.